Contractor Talk - Professional Construction and Remodeling Forum banner

Gloss Lacquer to Satin Lacquer Finish

21K views 7 replies 5 participants last post by  NCPaint1 
It's probably too late now but I think if you were going for uniformity I would have put two coats of semi on the raw doors first and then the two coats satin on all of them. Probably end up being much closer; although it will never be identical if you're not using the same products. Naturally make sure to stir the lacquer thoroughly to pick up the flatteners; they tend to settle out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top