Contractor Talk - Professional Construction and Remodeling Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Job i did recently was a high gable ceiling, exposed beams / varnished ceiling sprayed the whole thing out.

Actually had the undercoat custom made at a local paint shop here on the gold coast. Hes a small business (get stippled / ultratex) and you can tell him what you want in the paint, if its not covering he'll give you some titanium to mix in the paint etc. Quite interesting experience actually having the stuff made especially for my job.

The problems i had on this one were tannin bleed, and adhesion to the varnish. I used acrylic for this one, sprayed almost the entire job. Worked out well.

If i'd had done this by hand would have been there for possibly months ! How would you guys have done this job?

 
1 - 1 of 1 Posts
Top