Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 15 Posts

· Wood Craftsman
7,786 Posts
I could do that on my designjet 36" 750c+ but for someone to do this is it may become a little pricey for the actual size to be plotted.....:rolleyes: I would grid it/ratio it and plot it out on the ceiling. It shouldn't be that difficult....

If you can take that drawing to a printing shop they can spit this out with a ratio and just take your measurements off of the plot and transfer to the ceiling. - you'll have to snap some lines on the ceiling to form the grid but once that's done- should go very nice.....

Just a thought.

1 - 2 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.