Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
37 Posts
no we have 208/240/600. 3 phase
odd would be 25 hz

wadkin used that motor winding for Canada and the US

looks like a 70s machines and its the Wilson and William dealer tag too.
the first 2 numders is the test are the year. you better thank Panda real good for that one.:thumbsup:
there a big one for sure. The bobbin sander can be had solo . I have the JY.

jack
English machines
 

·
Contractor of the Month
Joined
·
26,925 Posts
This is a 230/460 volt machine, which is slighty odd for Canada, the majority seem to be 575v.

It is a disc and bobbin sander. Bobbin would be what we call a spindle sander.
230/460 motors arnt that rare but I've never seen a building with that service. 230 motor should run just fine on 208.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top