Contractor Talk - Professional Construction and Remodeling Forum banner

Ff / Fl Testing

2227 Views 1 Reply 2 Participants Last post by  Floordude
I work for a resinous/epoxy flooring contractor and we're overlaying on top of a pretty nasty concrete substrate that was milled with a highway planer. There is some talk of our product having to adhere to the Ff/Fl tolerances. All of my knowledge having to do with this specification is solely related to concrete materials.

Can an epoxy overlayment be held to these standards?
1 - 2 of 2 Posts
It is all in your floor prep.

Meet the requirement before the epoxy flooring goes down.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.