Contractor Talk - Professional Construction and Remodeling Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Vendor
Joined
·
24 Posts
Discussion Starter · #1 ·
I'm writing a blog post containing case studies on fastener failures. Do any of you all have stories to tell of fasteners failing, whether through the ignorance in applying the fastener or through a failure in the fastener itself? Any and all are appreciated!:thumbup:
 

·
Registered
Joined
·
1,214 Posts
"made in china" wood screws......20% the bit wont fit in the head, 20% break before flush, and 10% are too bent

Whats fun is explaining to a HO or new help to stop picking the ones of the ground and putting back in the box
 

·
Capra Aegagrus
Remodeler
Joined
·
25,220 Posts
While not specifically contrary to this site's written Terms of Service, the OP in this thread is essentially marketing research, which is against our policy as a peer-to-peer discussion forum. Sorry; thread closed.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top