Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
244 Posts
Discussion Starter · #1 ·
NC state code treats these panels as wall coverings. Therefore a wind load study must be performed, fire spread rating performed by an engineer and electrical outlets spaced no more than 12' apart.
BI and El failed my Building and Electrical Finals for a 3 season porch because of these panels. The paneIs were removed from their frames, inspections scheduled and then passed both inspections without an issue.

If you build in NC... you've been warned.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top