Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
rebelwopause
Joined
·
10 Posts
Discussion Starter · #1 ·
Howdy Folks, hope you're all well and in decent holiday spirits:thumbsup:

Am having an issue with a couple of exterior dual floodlights , in this case, Heath/Zenith brand, with dual brite motion sensor, 100 w lamps in each light . One is mounted over a back door , under soffit ; the other over a front entrance archway . After correcting the connections made by previous "whomever", got them working again fine on the one minute setttng ; going to 5 mins produces erratic function , lights may come on and stay on , or not come on when triggering motion sensor . I am wondering if the heat generated by two 100 w lamps could be messing with the motion sensor somehow... Anyone have a similar experience?
 

·
Registered
Joined
·
428 Posts
iffy

I just returned 2 Heath/Zenith for that reason. First we made sure it wasn't user error. It turned out they just suck basically. I'm staying with RAB in the future. Those are the cheapest things I've ever seen.
 
1 - 2 of 2 Posts
Top