Electrical Help Needed

2045 Views 4 Replies 4 Participants Last post by LJSMITH1, Nov 6, 2009

SNYD

Discussion Starter · Nov 3, 2009

I am in big need of some capacitors for a machine. I can not seem to find the 0.75 mfd - 330 VAC capacitors. Can anyone help out?:w00t:
It seems the 0.75 is the hitch causing problems.
Thanks
SNYD

Save

1 - 5 of 5 Posts

bwalley

· #2 · Nov 3, 2009

SNYD said:
I am in big need of some capacitors for a machine. I can not seem to find the 0.75 mfd - 330 VAC capacitors. Can anyone help out?:w00t:
It seems the 0.75 is the hitch causing problems.
Thanks
SNYD

Are you sure it isn't a 7.5 mfd?

Save

I am sure it is 0.75, that is why I have a problem. I bought some from a guy in Florida several years ago, but lost that contact information. On the capacitors he sent me it states:
0.75 uF +/- 5%
400v - 30000 h / ol . A
450v - 10000 h / ol . B
500v - 1000 h / ol . D
-25/85/21
400v - 10000 h / ol . B
-25/100/21

EN 60252
480v - 60 Hz

See less See more

Save

MarcD

· #4 · Nov 6, 2009

Try Contacting Siemens. Their local rep has found some stuff for me.

Save

LJSMITH1

· #5 · Nov 6, 2009

Without knowing the physical size of the Cap and what it is being used for (i.e. motor, solenoid, etc.) I have found a website that might be helpful.
http://capacitor.tedss.com/0.75uF
http://www.tedss.com/29F2116
Here's another source with another type...
MULCAP-069-51293
http://www.partsconnexion.com/capacitor_film_multicap.html

Good Luck!

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month