Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Trial and Error Opperator
Joined
·
2,018 Posts
jhark123 said:
haha, I was thinking of something off of this page :whistling: http://www.harborfreight.com/catalogsearch/result?q=sand+blasting I am going to repaint a dump truck box. But I am also going to be building dumpsters for my hooklift truck. Care to pm me info on the costs of professional blasting?
How big is the dumpsters and how many?
I do them all the time small and big and are they new or used Up to the 20' used take me ( with thin old paint) up to 4 hours with a 260 cfm compressor and A 1" I'd hose running a number # 6 nozzle My pot is a Marco 3.5 cubic that hold around 200 lbs of crushed glass I would start by looking to rent a big set up 185 cfm min running at 100 psi A professional pot size that will hold at lest 3 ea 50 lbs bags And a hose that's 1" from compressor to blast pot and 1" blast hose A number 5 or 6 nozzle You will need a breathing air helmet and line run from a breathing air filter this is a must or you can get hurt or die from the dust!!!!!!!!!! No joke !! A one ton frame just the tub will take from 3-5 hours with this set up
 

Attachments

·
Trial and Error Opperator
Joined
·
2,018 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top