Design opinion
I am doing the hidden dishwasher thing, three panel face,(outsourced), fluted pilaster flanking with hidden knife rack and spice rack. The problem, in attempting to make it look like a three drawer chest i need to put handles on each of the three simulated drawer faces. Panel material is 3/8th's, cant countersink the screw so it does not keep the panel from securing tightly against the dishwasher door. Also the pull point to open the door is not 5 or 6 inches down from the top(not great leverage). i could easily place the handle up high, in the top rail, but there goes the chest of drawer illusion. Had i built the panel myself, i could have beefed up the panel at least----any ideas? thanks
http://
![]()
http://
1 - 8 of 21 Posts
Good question, my original design called for some kind of elastic band secured across the front. The tolerances are so tight that when the unit is closed there is 1/16th of space left. As we operate it, the spices are suprisingly staying in place:blink
so Far). If they start to move, i will add the elastic band. GMOD.1 - 8 of 21 Posts
