Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2,330 Posts
Discussion Starter · #1 ·
On my house built in '93 its 6".

But I thought for sure the PH's of today are 5 1/2"

And those 2 hole reinforcing things that go over the door edge are 5 1/2" centers.

Can some one confirm. Need to know in the morning.
 

· Registered
Joined
·
443 Posts
For a single deadbolt and entry lock most locations are set at 38" and 44" from top of an 80" door. Locksets with deadbolt and handle in one can be almost anything that the manufacture decides. A 5-1/2" spread is common for some manufactures.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top