Contractor Talk - Professional Construction and Remodeling Forum banner


2135 Views 3 Replies 4 Participants Last post by  scrapecc
Can anyone tell me the best way they have found to forum concrete apron curbs that angle in. Thank you
1 - 4 of 4 Posts
I just rough screed/form the shape I want with a shorter section of 2x4. Then smooth with a pool trowel.

Are you haveing trouble with these sections?
We use the concrete clamps. they come in a 6 inch wide curb or a 8 inch wide curb. they are pretty common around here.
A wooden template of the shape of the curb inbetween the forms works nice for roughing out the shape.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.