Code Compliant Deck and Steps
1 - 17 of 17 Posts
Joined
·
16,403 Posts
Use your code book.
Joined
·
1,349 Posts
for starters the 6x6 closest to the house is too short...:whistling
Joined
·
1,144 Posts
Haha, I like thatm1911 said:
Riser and tread depth is missing.
Baluster and bottom rail spacing not specified.
Width of stairs and landing missing.
No detail of pad/landing on the ground.
Riser overhang not indicated.
No handrail shown.
Most importantly, the gaurd rails are missing from the landing down to the ground surface.
Baluster and bottom rail spacing not specified.
Width of stairs and landing missing.
No detail of pad/landing on the ground.
Riser overhang not indicated.
No handrail shown.
Most importantly, the gaurd rails are missing from the landing down to the ground surface.
I think the guard rails were not shown for clarity. I see that a lot.:laughing:
Joined
·
23,050 Posts
Looks fine.
Joined
·
16,403 Posts
Did you already build it?
![image-3642690864.jpg]()
Joined
·
3,658 Posts
Wait a sec...is that a map for buried treasure ?????
Hmmmmmmmmmmm
J.
Hmmmmmmmmmmm
J.
He's an inspector, being in Florida... Griz is right, baitfish are close right now and pelagics are right off the beaches.
The OP probably gets a lot of those being as most everyone in Florida who is a deck builder is also a trim carpenter/framer/mason/drywall/roofer and stucco master. A lot of hack carpenters around here.
The OP probably gets a lot of those being as most everyone in Florida who is a deck builder is also a trim carpenter/framer/mason/drywall/roofer and stucco master. A lot of hack carpenters around here.
1 - 17 of 17 Posts
Join the discussion
Join now to ask and comment!