Contractor Talk - Professional Construction and Remodeling Forum banner

Blum hinge basics?

12833 Views 22 Replies 12 Participants Last post by  IrishAsh
Ok im confused by blums concealed hinges literature.

What are the key things im looking for for a face frame hinge.

The more i read through the literature the more im confused.

Just have a basic face frame build and i normally do flush panel doors but this is only the second time i ever worked with blums concealed hinges.

Im sure its simple but i thinking im making it hard work :blink:
1 - 1 of 23 Posts
Whatever you end up using do a mock-up. Proper drilling offset is a must. ...
+1. I prefer setting up a jig in the drill press to using any of the small Blum jigs (and I don't have the Blum machine). Adjust until the mock-ups are right, then knock them out.
  • Like
Reactions: 1
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.