Contractor Talk - Professional Construction and Remodeling Forum banner

Blum hinge basics?

12686 Views 22 Replies 12 Participants Last post by  IrishAsh
Ok im confused by blums concealed hinges literature.

What are the key things im looking for for a face frame hinge.

The more i read through the literature the more im confused.

Just have a basic face frame build and i normally do flush panel doors but this is only the second time i ever worked with blums concealed hinges.

Im sure its simple but i thinking im making it hard work :blink:
1 - 1 of 23 Posts
Easiest are the Blum compacts. The main question you got to ask is how much of the faceframe do you want covered (overlay). I believe the choices are from 3/8" to 1 9/16.

You will of course need to drill a 35mm hole for the hinges to sit in at the back of the door.
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.