Contractor Talk - Professional Construction and Remodeling Forum banner

Blowing Light Bulbs

2102 Views 9 Replies 9 Participants Last post by  Hardly Working
Okay so here's the deal I'm sent out to a house to finish a remodel and install a set of ceiling lights. So I go ahead and hook up the lights and after a couple days I threw a couple bulbs in them. After a day or two when I come in the morning I flip the switch and pop there goes another bulb. So I changed it out for another bulb and a few days later pop. Voltage is not that high only at 112-118 volts.
Ideas? :sad:
1 - 1 of 10 Posts
:laughing: It does kinda look like he's bl..............well nevermind :)
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.