Contractor Talk - Professional Construction and Remodeling Forum banner

Blasting Kynar Paint

1757 Views 2 Replies 2 Participants Last post by  BSBS
Wondering if anybody can offer any tips on removing Kynar paint from aluminum railings.

1 - 3 of 3 Posts
Soda should work. I know Fine glass beads would remove it but you will etch the aluminum with a profile. What surface finish are you looking for?
Not sure at this point, were going to blast a sample rail. We are thinking it's going to be re-coated. Thanks for the response and will post after the test.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.