Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

Always 1st yr apprentice
71 Posts
Discussion Starter · #1 ·
Anyone recommend a good supplier reasonable prices for a new set up I want to put together.
Thompson ii valve and a grit shut off. Air reg I have already. Solenoid control valve I have but I will get a new elec dead man hand control and I will need new hose couplings and a couple nozzles. Hose I will have too buy local.
Im going to ring around local (australia) but to be honest I am sick of being screwed and poor service so if it comes from the states that is fine.

Any other recommendations or must haves?

Its still going to be a 150-250lb pot so not huge production and im keeping my water injection sysyem cause it works awesome. Getting rid of the dustless/soda blast rig cause it annoys me everytime I use it.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.