Contractor Talk - Professional Construction and Remodeling Forum banner

1 - 20 of 52 Posts

·
Curmudgeon
Joined
·
11,706 Posts
If we knew who you are,
and where you are, we might
be more inclined to opine.
Start with an introduction.
As of now, you sound a lot
like a do-it-yourself-er.
 

·
Registered
Joined
·
6,102 Posts
HELP, I am working on a house where the door openings were not framed tall enough for some large ornate doors. Trimming the bottom of the doors is not an option and the sheet rock has been installed and surfaced. I need to cut out 2 to 3 inches taller in the top of the door opening (bottom of door header). Used a reciprocating saw, but it took a long time and I had trouble keeping the blade straight on both sides of the opening.

WHAT IS THE BEST WAY TO CUT OUT PART OF THE DOOR HEADER ACCURATELY?
Any suggestins would be greatly appreciated!!!
Try asking under "DEMOLITION"
 

·
Curmudgeon
Joined
·
11,706 Posts
Gee, you people were really helpful. Hope I can cancel my registration to this website!!!


You don't seem very interested in
sharing much information about
yourself, or your project either.
 

·
Curmudgeon
Joined
·
11,706 Posts
You still look pretty much
like a DIYer from here. :whistling
 
1 - 20 of 52 Posts
Top