Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,517 Posts
I'll go with the others.If you use a mechanical sander over the sealer you will likely cut thru on some edges.Use a sanding block lightly by hand and then vacuum.I usually use a cotton cloth with a little thinner(very little) after vacuuming to wipe them down.
The 3M synthetic wool is nice but leaves particals you have to watch out for.I'm not familiar with that sprayer but make sure it can atomize the finish andf you are using and has the correct size tip for the solid content.
 
1 - 2 of 2 Posts
Top