Contractor Talk - Professional Construction and Remodeling Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi guys. We are building a deck around our pool and I added a double 2x12 “beam” at the half way point to give us 96” joists on both sections. Since the pool is oval, where the mid span beam is meeting our inside beam is at an angle (30°). I cannot find a joist hanger for a double 2x at an angle other than 45°.

what I was planning to do was use the Simpson LSSJ ZMAX adjustable hangers and then use the Adjustable angle brackets on top of the joist hangers. My other idea was to drop down to a 2x10 and bolt on a ledger for the beam to sit on.The double 2x is spanning around 86” so I’m not terribly worried about it but I would like to install this correctly.

any input/advice/recommendations are greatly appreciated. Keep up the good work gents!!!
 

·
Capra Aegagrus
Remodeler
Joined
·
25,230 Posts
Thanks for posting on ContractorTalk.com. The Moderators of this forum would prefer that you post Homeowner and/or Do It Yourself related topics on our sister site www.DIYChatroom.com

ContractorTalk.com is designed for professional contractors to discuss issues and topics related to the construction and remodeling industries. Many of our professional contractors are also members at DIYChatroom.com and are looking forward to assist you with your needs.

Please take a moment to post your question at www.DIYChatroom.com If you're not already a member of DIYChatroom.com you can sign up for a free account by going to http://www.DIYChatroom.com/register.php/

We apologize for any inconvenience that this may have caused. This thread has been closed.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top