1/4 or 3/8 air hose

14878 Views 7 Replies 7 Participants Last post by tepmo, Dec 19, 2009

ebski387

Discussion Starter · Oct 31, 2009

i use 1/4 fittings with 1/4 air hoses does it matter if i use 1/4 or 3/8 air hoses what does everyone use?

1 - 8 of 8 Posts

BKFranks

· #2 · Oct 31, 2009 (Edited)

I use a 1/4. Lighter for sure. Flexeel.
http://www.freelin-wade.com/documents/Freelin-Wade_Flexeel.pdf

BillD

· #3 · Oct 31, 2009

I use 1/4" for both and it has posed no problems to date.

Bill

Warren

· #4 · Oct 31, 2009

I prefer 1/4 but in the cold weather we usually run a 3/8 line first from the compressor. I think it takes longer for the 3/8 line to freeze.

naptown CR

· #5 · Nov 1, 2009

speaking of hoses does anyone know where to get the gray Senco 1/4" hose. That is the best hose I have ever had. never gets stiff when it's cold rolls up nice and lasts forever.

2ndGen

· #6 · Nov 1, 2009

1/4" for everything.

Swivels on my guns.

Use rubber hose from compressor to roof (to take a beating; moving around, having trash dumped on it, being stepped on, rolled over, etc...).

From the eave up, of course I use Polyurethane Hoses.

tepmo

· #7 · Dec 19, 2009

Aperture through passage identical

tepmo

· #8 · Dec 19, 2009 (Edited by Moderator)

Edit: Please contact Nathan if you wish to advertise your product/services.

Mac

1 - 8 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.