Ford Mustang Garage Floor
March 25, 2015
- Activity
Log - Blogs0
- Forums54
- Projects2
- Reviews0
- Toolbox0
This was an Amazing Garage Floors installation in North Kansas City a couple weeks ago. We began at approximately 8 AM on a Friday morning, and assisted the homeowner in removing the cabinets before we could begin. We performed a diamond grind to the entire floor and fixed a few cracks and pits that were in the floor. We had the floor completely epoxied and chipped by a little after noon, and gave it a few hours to cure.
Amazing Top Coat was applied and completed at about 6 PM, you can see the sun setting in one of the pictures. The photos with the cabinets and Mustangs were taken on Saturday, about 1 PM, only 29 hours after beginning the project, and about 19 hours after we completed the floor.
We also coated an old basement entry that the client had covered. We ground down the existing concrete and leveled and transitioned it to the existing garage floor.
Join the Amazing Garage Floors network and turn out amazing garage projects like this one in just 1 day!
Comments (6)
.
looks a lot better. Whats with the sheet rock?
That place is NICE! I want one!
Did they let you drive the mustang? haha
The homeowner had removed an access to his basement and covered it with tile backer board. We ground the existing "foundation" wall down to flush and coated both to blend into the floor
No, there are actually 2 Mustangs in there, but I have one of my own that's a convertible and really fun to drive!