Contractor Talk - Professional Construction and Remodeling Forum banner
Cancel
Create thread New Forums

Ripping Door for Narrower Opening

Jump to Latest
1 - 10 of 10 Posts
B

basswood

· Artisan Carpentry
Joined
·
1,985 Posts
Discussion starter · #1 ·
Today I had to reduce the width of a door and decided that instead of routing new hinge mortises... I would rip the old edge with mortises off the door, then rip another strip off the edge of the door & then put the original door edge with mortises back on the door.

I used a rail guided saw (mine is a Makita 8-1/4" on an EZ Guide). Glued and clamped the door edge back on. This not only saved mortising hinges, but also staining and finishing the door edge. You can't even tell I did it.
 

Attachments

#4 · (Edited)
Well........

Most doors have a Coupla inches of Solidity along all edges.............

I woulda' Re-Mortised with single cuts on both sides.

Yer way is complex and yet works.........That is of course iffinya plans to do some neat filling and sanding and paintin'!

There is the Theory of K.I.S.S.!!
 
#5 ·
Why not just use the strip that you ripped as a story pole to mark and route out the mortises?
It seems like more trouble to glue back the strip, plus you have a visible glue line.
I guess to each his own...:whistling
 
#6 ·
Reminds me of the time I cut the middle pannels out of a 6 pannel hollow core colonist door for a closet under a set of stairs LOL. Joined it back together with a ripped 2x4 block, lots of glue, and some pins. Turned out better than I thought it would...........couldn't tell after it was painted!
 
Discussion starter · #7 ·
m1911 said:
Why not just use the strip that you ripped as a story pole to mark and route out the mortises?
It seems like more trouble to glue back the strip, plus you have a visible glue line.
I guess to each his own...:whistling
Click to expand...
Well, no messing with stain and finishing. I think it saved me some time. The glueline was really invisible (though it does show in the photo).

Just offering up another way to do a routine task. I've done it the other way countless times... thought I'd try another approach.

All the best,

Bass
 
Discussion starter · #9 ·
MALCO.New.York said:
Well........

Most doors have a Coupla inches of Solidity along all edges.............

I woulda' Re-Mortised with single cuts on both sides.

Yer way is complex and yet works.........That is of course iffinya plans to do some neat filling and sanding and paintin'!

There is the Theory of K.I.S.S.!!
Click to expand...
I don't think single cuts on both sides would work (ripping off the edge with the knobset would mess up the backset), and on a flush door--no need to keep stile widths the same--no rails or stiles.

Anyway, I don't consider this a better method, just a different option...

No filling and sanding needed with the cut quality of a rail saw. Here is a close up of the cut (rail has an anti-clip edge and saw has a 40 tooth Freud blade--cut quality is equal to a Festool or the Unisaw in my shop with a Glueline Rip Blade). One advantage of using a Makita saw vs. Festool is blade price--I ran into three nails ripping the edge off this door. After hitting this nail, there are some very minor blade marks, but they did not effect the glue up:
 

Attachments

1 - 10 of 10 Posts
About this Discussion
9 Replies
5 Participants
Last post:
m1911
Contractor Talk - Professional Construction and Remodeling Forum
posts
3.6M
members
169K
Since
2003
A forum community dedicated to professional construction and remodeling contractors. Come join the discussion about the industry, trades, safety, projects, finishing, tools, machinery, styles, scales, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
General Discussion Tools & Equipment Business Painting & Finish Work Decks & Fencing