No Dwayne, haven't set it up yet. moving to a new building next month and the plan is to do it there. Dale
Replies 21Lots of used ones from guys that have gone out of business only a few hours from me.
Replies 14Well , Blasted all day today , new 12/16 media . All the suppliers said , EVERYBODY is using 12/16! Im here to say that it sucks ( the media ). I noticed my old dusty worn out...
Replies 21Yes, use them all the time when I need to get into tough spots. I keep two 90º and a 45º in the tool box at all times and yes they do wear out fast with hard media and high pres...
Replies 4Get the professional version of Peel Away "Smart Solution" It's a green product and you just spray or roll it on, let it sit for a day or so and then pressure was it of. Do it a...
Replies 4Thanks to all that replied.... We did update our site to be mobile friendly and I think it looks pretty good, if I do say so myself. We updated it just before the APR 21 date....
Replies 12Jim, Everyone I know is swamped right now just trying to clear the winter backlog.
Replies 10Why HoldTight? Why 100-200$ for a one car? You dilute it 1:50 or 1:100. To be honest, when you gonna use proper glass size, then you not even scratch zinc on a steel. So HoldTig...
Replies 332I shoot both dry and wet, Farrow and Surfacetek are my pots. I don't do cars but I wouldn't do them wet if I did for the reasons cited (wet sand stuck in corners and the flash ...
Replies 332how much water are u using per minute in your geo/farrow blasters? It depends, but if I'm blasting for say 7 hours straight it's around 100 gallons. Sometimes as low as 80 gallo...
Replies 332Hey Guys, On the difference between Farrow and GeoBlaster they are very similar on how they move and mix media. Farrow was the first to take an old concept (Wet Abrasive blastin...
Replies 332I'm not going to get into a pissing match about wet vs dry blasting and as I said I do both. Actually I easily doubled my business overnight offering both services. On location ...
Replies 332I blast both wet and dry, The Farrow and the GeoBlaster gets me a lot of work that I wouldn't get if I was just a dry blaster. What's better MMLJ or GeoBlaster?... GeoBlaster ha...
Replies 332shrink wrap tape is whats used on wrap seams, hull preservation tape is used to attach edge of shrink wrap to hull. Its thicker, tougher and no residue. something else that work...
Replies 18Replies 2
I put a Schmidt Valve and it made a huge difference http://totalschmidt.com/wp-content/uploads/2012/03/TVII-2011.jpg
Replies 9I found it left adhesive when removed - not a problem for you? With Gorilla Tape I find I have to put blue masking tape down first and Gorilla down on top. I'm going to look in...
Replies 18One other note, lead tends to oxidize rather quickly. You have to get a barrier coat on to it the same day of you're just wasting the customers money. Lead oxidation won't allow...
Replies 19300 CFM Compressor will cut your blast times in half.
Replies 2First time I saw one of these... I have to look into it. Thanks
Replies 7