We were contracted to install a micro-topping over the existing gycrete floor for a new Seattle restaraunt. The only on-site water was 14' off the floor in the back of the space. The only entrance was the front door. Each coat had to be applied from the back of the space to the front door. It was mid-December and in the 30's outside on the sidewalk where all the material had to be mixed.
3 coats of Duraamen Sgrafino integrally colored micro-topping. An epoxy primer coat. And a polyurethane top coat. Start to finish in 3 days.
We tried to get a sand dune-like look in the final coat of micro-topping since the floor is in a fish and chips joint and that seemed to make sense.
Comments (0)