Contractor Talk - Construction and Remodeling Site
CLICK HERE AND JOIN OUR COMMUNITY TODAY...IT'S FREE!
Go Back   Contractor Talk - Professional Construction and Remodeling Forum > Trade Talk > Painting & Finish Work > Painting & Finish Work Picture Post

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 02-20-2009, 10:42 PM   #1
A bit abrasive.
 
WisePainter's Avatar
Trade: Painting
 
Join Date: Sep 2008
Location: KC KS/MO
Posts: 1,493
WP's Work

After I finished the current residence, I was hired to make their previous home (literally around the corner) ready for selling.
They are wonderful people and truly deserve the home they are in, especially after having lived in such cramped quarters as these with 4 children..this is also the house where I ate $250.00 worth of floor insanity...

Icky kitchen:






picture taken from the "den" which today received an alkyd primer.

The floor that killed me:
damn you floor!!
I will return to this in a moment...



This is the tile backsplash that I sought info on concerning the proper coating:





In my opinion, these are pretty cool tiles...oh well, say "bye bye" tiles.

Here is the highly recommended bonding primer that has become my latest "favorite", this stuff is incredible:



Applied with white china bristle SW cheapy:


Consistent brush lines are sexy!

Then I mixed up the 2 part water based epoxy from S.W.


Done:





Looks good to me, I will be using "Mr. SW 2 part water based epoxy" again.

Next is wallpaper removal and cabinets...

WisePainter is offline   Reply With Quote
The Following User Says Thank You to WisePainter For This Useful Post:
Mr. Mike (02-21-2009)
Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. ContractorTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any construction or remodeling task!

Join Contractor Talk

Join the #1 Contractor Forum Today - It's Totally Free!

ContractorTalk.com - Are you a Professional Contractor? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's the leading place for contractors to meet online. No homeowners asking DIY questions. Just fellow tradesmen who enjoy talking about their business, their trade, and anything else that comes up. No matter what your trade is you'll find that ContractorTalk.com is a great community to join. Best of all it's totally free!

Join ContractorTalk.com - Click Here JOIN FOR FREE

Old 02-20-2009, 10:59 PM   #2
Pro
Trade: Ornamental Plasterer/Restorer
 
Join Date: Feb 2009
Location: NYC
Posts: 418
I don’t like what you did with the tiles. Sorry. And what it is in the last photo – big chip?... Or dust?
Resta is offline   Reply With Quote
Old 02-20-2009, 11:12 PM   #3
A bit abrasive.
 
WisePainter's Avatar
Trade: Painting
 
Join Date: Sep 2008
Location: KC KS/MO
Posts: 1,493
Quote:
Originally Posted by Resta View Post
I don’t like what you did with the tiles. Sorry. And what it is in the last photo – big chip?... Or dust?
Yeah I liked the originals better, did you click the link to the backsplash dilemma?

What you see there is a string hanging down left over from the grasscloth wallpaper removal, that will be in the next set of pics.
This is a make ready job, I don't normally go for these "polishing turd" kind of jobs however for this client I will make an exception.
WisePainter is offline   Reply With Quote
Old 02-21-2009, 12:56 AM   #4
Organic Painter
 
Mr. Mike's Avatar
Trade: Painting Contractor
 
Join Date: Dec 2008
Location: Louisville, Ky.
Posts: 1,008
May I ask why or if you painted the tiles from side to side, I always thought this type of painting should be up and down. No offense I am an other wise painter and am just asking.

BTW: Thanks for providing lots of pictures and posts for us to browse and comment on.
Mr. Mike is offline   Reply With Quote
Old 02-21-2009, 01:06 AM   #5
A bit abrasive.
 
WisePainter's Avatar
Trade: Painting
 
Join Date: Sep 2008
Location: KC KS/MO
Posts: 1,493
Quote:
Originally Posted by Mr. Mike View Post
May I ask why or if you painted the tiles from side to side, I always thought this type of painting should be up and down. No offense I am an other wise painter and am just asking.

BTW: Thanks for providing lots of pictures and posts for us to browse and comment on.
Could be, I have never painted tiles before.
I went both directions between the primer and top coat to be sure I was getting good coverage.
I wonder if there is a reason to paint them vertically?

You're welcome, I have a few more between the 2 jobs left to post.
WisePainter is offline   Reply With Quote
Old 02-21-2009, 01:09 AM   #6
Organic Painter
 
Mr. Mike's Avatar
Trade: Painting Contractor
 
Join Date: Dec 2008
Location: Louisville, Ky.
Posts: 1,008
Quote:
I wonder if there is a reason to paint them vertically?
When you paint a surface vertically it is harder to see the brush marks being that the light is always above or below the surface.

A solid door for example that would get brushed should be brushed up and down. Even the small squares at the top of most exterior doors should be up and down, I see a ton that have been painted side to side though.
Mr. Mike is offline   Reply With Quote
Old 02-21-2009, 08:25 AM   #7
Pro
Trade: painting and refinishing
 
Join Date: Jul 2008
Location: Illinois
Posts: 197
looks like 100% improvement to me. That brown tile was nasty. For what it is I'd say it looks good. I notice brush marks in the primed pics but not the topcoated pics. looks fine to me.

Are you spraying the cabinets?
Traditions2 is offline   Reply With Quote
Old 02-21-2009, 12:21 PM   #8
A bit abrasive.
 
WisePainter's Avatar
Trade: Painting
 
Join Date: Sep 2008
Location: KC KS/MO
Posts: 1,493
Quote:
Originally Posted by Traditions2 View Post
looks like 100% improvement to me. That brown tile was nasty. For what it is I'd say it looks good. I notice brush marks in the primed pics but not the topcoated pics. looks fine to me.

Are you spraying the cabinets?
I wish.

I wanted to roll the tiles with a white foamy whizzz but the surface was too uneven. Never having used XIM I wasn't sure if I could step on it to lay out better, the water based epoxy was another first for me. Next time I will step on both.

So I took the foamy whizz and used it on the cabinets.

Whizz Alkyd All Surface Enamel satin (which builds like a semi gloss with 1 coat) on the doors while hanging w/vaseline on the hinges, there was nowhere else to stage them.
I put the paint on with a white china then tooled out out with the roller.




Nasty paper has also been removed here:





After the doors and drawers, time for the body to get painted:



I like to stack my drawers with the smallest on the bottom! At least when I look back at the picture I do...








Good to go!








Is this the way I would normally do it? Um, no but I weighed the spray vs. brush and roll with the obvious choice being made because this was a "budget" job.
When people hear the words "painted cabinets" they instantly curl their lip and envision some brush line filled mess...I hate that.
Total time for the cabinets was about 8 hours over 2 days, profit was $350.00

next is the floor pics...


WisePainter is offline   Reply With Quote
The Following User Says Thank You to WisePainter For This Useful Post:
Mr. Mike (02-22-2009)
Old 02-21-2009, 05:20 PM   #9
Pro
Trade: drywall contractor
 
Join Date: Dec 2007
Location: Iowa
Posts: 708
Great post WisePainter. Enjoyed the pictures and the notes with them.
Tim0282 is offline   Reply With Quote
Old 02-22-2009, 10:33 PM   #10
Organic Painter
 
Mr. Mike's Avatar
Trade: Painting Contractor
 
Join Date: Dec 2008
Location: Louisville, Ky.
Posts: 1,008
Great thread for sure.
Mr. Mike is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do you believe the customer is always right? Mike Finley Business 43 06-17-2009 08:55 AM
4 Day Work Week TrenchDweller General Discussion 26 03-27-2009 10:35 AM
plumber refuses to finish work Chris Simms General Discussion 7 03-25-2009 06:02 PM
taking a crack at my own concrete work J-Peffer Masonry 1 07-24-2008 02:42 PM
Looking for work, will travel Perry Potash Help Wanted or Looking For Work 0 03-28-2007 07:38 PM


Top of Page | View New Posts


All times are GMT -5. The time now is 10:55 AM.


Contractor Talk™ © 2003 - 2009 The Building Network LLC