Help With My Proposal

AllPro repair

I am new here i been reading for a few weeks (great stuff guys!)
i need help with writing a proper proposal that covers me maybe you guys can help
here is what i have been using.
any help would be great.
i want a detail proposal that i can just modify a little for each job
i want to print this on site from my laptop ad printer.


ROOF TYPE: Laminateshingle roof.
WE HEREBY SUBMIT SPECIFICATIONS AND ESTIMATES FOR:

MAIN COMPOSITION SHINGLE ROOF:
1. Removal of all existing roofing and flashing membranes down to the plywood deck surface and haul away.
2. Replacement of any damaged or deteriorated plywood decking at an additional cost of $75 per four foot by eight foot sheet of roof decking needed.
3. Replacement of following flashing materials: step flashings, collars, pipe jacks, perimeter drip edge material and all roof vents. All materials to be installed "hidden nail" fashion so that no "shiners" are present.
6. One row of ice and water protection membrane shall be installed in all valleys and around the chimney.
7. One row of ice and water protection membrane shall be installed along all eaves and shall extend 3 feet from edge of roof.
8. Installation of one layer of #30 asphalt saturated roofing underlayment on deck surface and will be fastened down.
9. Installation of new 25 year, 3 tab asphalt shingles. Shingles will be installed in strict accordance with the manufacturer's specifications.
12. Installation of manufacturer's pre-made hip and ridge material. Hip and ridge rows will be run straight and shall be installed according to manufacturer's instructions.

rcb

Not bad but I would use shinglemate instead of 30# rag felt.