Metal Shelf Bins

WarnerConstInc.

Anyone have any experience with a unit like these:
http://www.northerntool.com/webapp/w...42+1477+774697

Thinking it might be nice to mount one of the tall ones in my trailer.

480sparky

Until you hit a bump. Then you've got a mess.

Get something that closes securely and latches, with a solid top.

Stuff like this.

__________________
Site : the area or exact plot of ground on which anything is, has been, or is to be located.
Sight : The power or faculty of seeing; perception of objects by use of the eyes; vision.
Cite : To mention in support, proof, or confirmation; refer to as an example.

WarnerConstInc.

Those are nice, and EXPENSIVE, damn. I will built my own from wood before I spend that kind of coin.

They are nice though.

genecarp

Had a van once. put those bins in. drilled out the frame. attached a bungee cord across each row to retain the bins. G

__________________

WarnerConstInc.

I guess I could buy the bins and make a cabinet to slide them in. I would have to make some sort of door that shut or something.

Those bins are only 3 and change each.

naptown CR

I make my own bins out of scrap birch or maple ply

katoman

Go see the vehicle section. Someone has one of those behind the side door in his trailer. That way nothing can fall our. Brilliant.

WarnerConstInc.

The guy that looks like Castro!!

I like the side door on my trailer, I dont want to render it useless. Besides, I am going to get and RV awning for that side.

fireguy

American Van.com for straight backed open shelves. Or www.grainger.com. I have an open shelf in my trailer, held in place with an adjustable strap. I also put a cap on the bottom of the legs so the leg did not gouge the Rhino lining on the floor. I then used a stanley angle brace screwed to the legs & tge fkiir. that was so hte legs stayed in place and did not walk on the floor.